Wacker-Neuson G40 G60 G95 Operators Manual Mobile Generator

Description

Factory Operators Manual For Wacker-Neuson Mobile Generator. Manual For Owners And Operators. It Contains Important Information And Instructions For Maintenance Description Of The Functions And Capabilities Of The System. Description Of Possible Faults / Problems And Their Solution.

Format: PDF
Language: English
Pages: 84
Issued: july 2016
Bookmarks: Yes
Searchable: Yes
Hydraulic Diagrams: Yes

Model

Wacker-Neuson Mobile Generator
G40 (50Hz)
G60 (50Hz)
G95 (50Hz)

Contents

FOREWORD
-SAFETY INFORMATION
Signal Words Used in this Manual
Machine Description and Intended Use
Safety Guidelines for Operating the Machine
Service Safety
Operator Safety while Using Internal Combustion Engines
Safety Guidelines for Mobile Generators
Safety Guidelines for Lifting the Machine
LABEL LOCATIONS
LABEL MEANINGS
-LIFTING AND TRANSPORTING
Lifting the Machine
Preparing the Machine for Transport on a Truck or Trailer
-MACHINE SETUP
Preparing the Machine for First Use
Positioning the Machine
Grounding the Generator
Recommended F|uel
Refueling the Machine (Deep Sea Controller 7310)
-OPERATION, CONTROL, AND COMPONENT LOCATIONS
Control and Component Locations
Control Panel Components
-OPERATION (DEEP SEA CONTROLLER: DSE 7310)
Main Circuit Breaker
Genset Controller Power Switch
Deep Sea Controller Buttons/Functions
Genset Controller Alarms and Shut-Down Conditions
Before Starting the Machine
Starting and Running the Generator
Stopping the Generator
Emergency Stop Switch
Engine and Generator Monitoring
-WORKING WITH DEEP SEA CONTROLLER: DSE 7310
Introduction
Navigating the Menus
Adjusting Screen Contrast
Changing the Language
How to Reset the Maintenance Timer
-HOW TO CONNECT LOADS (380-400V)
Lug Terminal Connection Diagrams
Connecting 380-400V, 3-Phase and Single-Phase Loads
-USING REMOTE START CAPABILITIES
Remote Run Terminal Block
Remote Transfer Switch
Preparing for Automatic/Remote Start-Up (Deep Sea)
-GENERAL MAINTENANCE
Periodic Maintenance Schedule
Preparing for Maintenance
Cleaning the Machine
Inspecting the Machine
Checking and Draining the Containment System
Checking the Exhaust System
Maintaining the Battery
Storage
Machine Disposal and Decommissioning
ENGINE MAINTENANCE: PERKINS
TROUBLESHOOTING
-TECHNICAL DATA
Engine: G40 / G60 / G95
Generator: G40 / G60 / G95
Dimensions: G40 / G60 / G95
-SCHEMATICS, MACHINES WITH DEEP SEA CONTROLLER
Fuses
AC Schematic: G40 / G60 / G95
Electrical Schematic Components: G40 / G60 / G95
DC Schematic: G40 / G60 / G95
DC Schematic Components: G40 / G60 / G95

What you get

You will receive PDF file with high-quality manual on your email immediately after the payment.